1. Spunlace non-woven fabric: The spunlace process sprays high-pressure fine water onto one or more layers of fiber webs to entangle the fibers with each other so that the fiber webs can be reinforced and have a certain strength.
2. Thermally bonded non-woven fabric: Thermally bonded non-woven fabric refers to the addition of fibrous or powdery hot-melt bonding reinforcement materials into the fiber web, and the fiber web is heated, melted and cooled to reinforce the fabric.
3. Pulp air-laid non-woven fabric: Air-laid non-woven fabric can also be called dust-free paper and dry paper-making non-woven fabric. It uses air-laid technology to open the wood pulp fiberboard into a single fiber state, and then uses the air-flow method to agglomerate the fibers on the web curtain, and then strengthen the fiber web into a cloth.
4. Wet-laid non-woven fabrics: Wet-laid non-woven fabrics are used to open fiber raw materials placed in an aqueous medium into single fibers, and at the same time mix different fiber raw materials to form a fiber suspension slurry, which is transported to a web forming mechanism. The fibers are formed into a net in a wet state and then reinforced into a cloth.
5. Spunbond non-woven fabric: Spunbond non-woven fabric is formed after the polymer has been extruded and stretched to form continuous filaments, the filaments are laid into a web, and the web is then bonded by itself, thermally bonded, and chemically. Bonding or mechanical reinforcement method, the fiber web becomes non-woven.
6. Melt-blown non-woven fabric: The process of melt-blown non-woven fabric: polymer feeding-melt extrusion-fiber formation-fiber cooling-net formation-reinforcement into cloth.
7. Needle-punched non-woven fabric: Needle-punched non-woven fabric is a kind of dry-laid non-woven fabric. Needle-punched non-woven fabric uses the piercing effect of needles to reinforce the fluffy web into a cloth.
8. Stitched non-woven fabric: Stitched non-woven fabric is a kind of dry non-woven fabric. The stitching method uses the warp-knitted loop structure to adjust the fiber web, yarn layer, and non-woven materials (such as plastic sheet, plastic thin film). Metal foil, etc.) or their combination is reinforced to make a non-woven fabric.
